V2916GB

V2916GB Overview

  • 16-Port 100/500/1000Base-T
  • Ethernet Service Interface
    ✓ 16-Port 100/1000Base-T(RJ-45)
    ✓ 100Baes-TX and 500M 2-Pair Mode
  • Uplink Port
    ✓ Optional Slot 2-Module(Max. 4 x 10GE)
  • Size : 250mm (W) x 180mm (D) x 40mm (H), 1-RU
  • AC Power : 100Vac ~ 240Vac / 50 ~ 60Hz
  • Operating Temp :  0℃ ~ 40℃ / 5%~95% RH

System Feature

General

  • 128Gbps Switch Capacity
  • 800MHz MIPS-34Kc CPU
  • Memory : 32MByte SPI NOR Flash, 256MB DDR3 SDRAM

Service Interface

  • 16-Port 100/1000Base-T(RJ-45)
    100Base-TX and 500M, 2-Pair Mode

Uplink Interface

  • Max 2 x 10GE Configuration (1Slot Type)
  • 1-Optional Expansion Slot
  • Variable Type Optional Modules
    – Max. 2 x 10GE
    – Refer to supported optional modules slides

Note. Optional uplink interfaces may be discussed to propose effectively

Functionalities

Layer2 Switch

  • Standard Ethernet Bridging
  • Managing 32K MAC address entries
  • IEEE 802.1Q tagged frame supporting 4K VLANs
  • Port/MAC/Subnet/Protocol-based VLAN
  • VLAN stacking
  • Q-in-Q
  • Spanning Tree Protocol (STP/RSTP/MSTP)
  • IEEE 802.3ad link aggregation
  • Port mirroring
  • Storm and Flow control
  • Self loop Detection

Multicast

  • IGMP v1/v2/v3, Snooping, Immediate leave
  • MVR

Quality of Service

  • 8 Queues per Port
  • Traffic Scheduling (SPQ, WRR)
  • Diff Serv.
  • Ingress/Egress Rate Shaping

Security

  • SSH v1/v2
  • RADIUS, TACACS+ Authentication
  • MAC/port based authentication according to 802.1x
  • Ethernet type / L4-based ACL
  • DHCP Filtering
  • MAC Filtering

Management

  • Serial/Telnet CLI
  • SNMP v1/v2/v3
  • DHCP server, relay agent with option82
  • Netconf/YANG
  • RMON
  • Syslog
  • Software Download/ Upgrade
  • Configuration Download/ Upload
  • KT UTP Modem IOP
  • iPerf Server(Optional)

IPv6

  • IPv6, ICMPv6, PPPoEv6
  • MLD v1/v2
  • DHCPv6 Server/Client
  • LDRA

Physical

  • Dimension : Approx. 250mm (W) x 180mm (D) x 40mm(H), 19inch 1-Rack Unit

Environmental Conditions

  • Operation Temp. : 0 ~ 40℃
  • Storage Temp. : -40 ~ 70℃
  • Operating Relative Humidity : 5% ~ 95% non-condensing

Power Requirements

  • Power Supply
    Input : AC 100 ~ 240V, 50/60Hz
    Output : DC 12V / 2.5A
  • Power Consumption : Approx. Max. 30W
  • PFC Mandatory design

Indicators

  • System Status LEDs
    RUN
  • Service Port Status LEDs
    LINK/ACT, SPD

Regulations

  • KC