N-ITUS - V2924GB

V2924GB

Home / Product / Ethernet Switch Solution / V2924GB

V2924GB Overview

24-Port 100/500/1000Base-T
Ethernet Service Interface
✓ 24-Port 100/1000Base-T(RJ-45)
100Baes-TX and 500M 2-Pair Mode

Uplink Port
✓ Optional Slot 2-Module(Max. 4 x 10GE)

Size : 440mm (W) x 226.4mm (D) x 44mm (H), 1-RU
FAN Installation : 2-Slot Config (2-FAN/1-Slot)
AC Power : 100Vac ~ 240Vac / 50 ~ 60Hz
Operating Temp : -20℃ ~ 60℃ / 5%~95% RH

System Feature

General

128Gbps Switch Capacity
800MHz MIPS-34Kc CPU
Memory : 32MByte SPI NOR Flash, 256MB DDR3 SDRAM

Service Interface

24-Port 100/1000Base-T(RJ-45)
100Base-TX and 500M, 2-Pair Mode

Uplink Interface

Max 4 x 10GE Configuration (2Slot Type)
2-Optional Expansion Slot
Variable Type Optional Modules
– Max. 4 x 10GE
– Refer to supported optional modules slides

Note. Optional uplink interfaces may be discussed to propose effectively

Functionalities

Layer2 Switch

Standard Ethernet Bridging
Managing 32K MAC address entries
IEEE 802.1Q tagged frame supporting 4K VLANs
Port/MAC/Subnet/Protocol-based VLAN
VLAN stacking
Q-in-Q
Spanning Tree Protocol (STP/RSTP/MSTP)
IEEE 802.3ad link aggregation
Port mirroring
Storm and Flow control
Self loop Detection

Multicast

IGMP v1/v2/v3, Snooping, Immediate leave
MVR

Quality of Service

8 Queues per Port
Traffic Scheduling (SPQ, WRR)
Diff Serv.
Ingress/Egress Rate Shaping

Security

SSH v1/v2
RADIUS, TACACS+ Authentication
MAC/port based authentication according to 802.1x
Ethernet type / L4-based ACL
DHCP Filtering
MAC Filtering

Management

Serial/Telnet CLI
SNMP v1/v2/v3
DHCP server, relay agent with option82
Netconf/YANG
RMON
Syslog
Software Download/ Upgrade
Configuration Download/ Upload
KT UTP Modem IOP
iPerf Server(Optional)

IPv6

IPv6, ICMPv6, PPPoEv6
MLD v1/v2
DHCPv6 Server/Client
LDRA

Physical

Dimension : Approx. 440mm (W) x 226.4mm (D) x 44mm(H), 19inch 1-Rack Unit

Environmental Conditions

Operation Temp. : -20 ~ 60℃
Storage Temp. : -40 ~ 70℃
Operating Relative Humidity : 5% ~ 95% non-condensing

Power Requirements

Power Supply
Input : AC 100 ~ 240V, 50/60Hz
Output : DC 12V / 3.8A
Power Consumption : Approx. Max. 40W
PFC Mandatory design

Indicators

System Status LEDs
RUN, FAN
Service Port Status LEDs
LINK/ACT, SPD

FAN Specification

FAN Speed : 6000RPM,
Bearing Type : Vapo
Operating Voltage : 4.5 ~ 13.8V
Start-up Voltage : 4.5V(off/on)
Power Consumption : 0.54Watt
Max. Air Flow : 7.7 CFM
Noise Level : 21.0dB(A)

Regulations

KC

© Copyright 2024 N-iTUS. All rights reserved.