Vnet 1510K

Rather than trench cable, dig up yards and rewire households for fiber, NITUS’s G.fast solution delivers fiber-like speeds over existing copper infrastructure, addressing last mile issues and reducing CAPEX by deferring the cost of extending fiber to every building and home; G.FAST extends high speed broadband to locations where fiber deployment is difficult. G.FAST is rated for up to 500m about 500m (1600ft) NITUS’s Vnet 1510K CPE provides one G.FAST (RJ-45) uplink port, one POTS (RJ-11) port, and four 10/100/1000Base-T ports.

  • Deliver fiber-like speeds over the last mile of existing copper infrastructure
  • Reduce CAPEX by deferring the cost of extending fiber to every building and home
  • Extend high speed broadband to locations where fiber deployment is difficult
Category: Tag:

Description

  • CPU: 1GHz Dual core ARM Processor
  • 4 Port x 10/100/1000Base-T Service port
  • Support POTS
  • System reset buttons
  • Bridge Mode and NAT Mode
  • IGMP Proxy/Snooping
  • Port/Protocol-based VLAN QoS
  • PPPoE Support
  • IPv4/IPv6 Dual Stack
Flash Memory 128MB
SDRAM 128MB
Service Interface 4 port 10/100/1000Base-T
Uplink Interface G.FAST(RJ-45) 1port
POTS(RJ-11) 1port
Power Local AC/DC Power Adaptor(Input 90~240VAC, 47~63Hz)
Adaptor : 12V/1.5A, Wall Mountable
Power Consumption 7W
Operating Temperature -0~50℃
Storage Temperature -40~90℃
Humidity 20~90% (non-condensing)
Dimension [WxHxD],mm 160mm x 44.5mm x 125mm

Layer 2

  • Standard Ethernet bridging
  • Port/Subnet/Protocol based VLAN
  • STP/RSTP/MSTP/PVSTP/PVRSTP
  • 802.3ad Link aggregation
  • Port mirroring
  • Rate-limiting with Egress shaping
  • MDI/MDIX automatically sense
  • Flow Control acc. to 802.3x
  • MAC Address Translation with n:1

IP Multicast

  • IGMPv1/v2/v3
  • IGMP snooping V3
  • IGMP Proxy V3
  • Multicast VLAN Registration (MVR)

QoS

  • Conditional rate limiting
  • ToS
  • CoS(IEEE 802.1p)
  • SPQ,WRR Scheduling for QoS • 8 queues per port

Layer 3

  • IPv4 and IPv6 (Static)
  • DHCP Client, Server

Management

  • Serial/Telnet (CLI)
  • SNMPv1/v2/v3
  • RMON
  • DHCP Relay Option82

G.fast

  • Standard : G.fast
  • G.9700 (G.fast PSD(Power Spectral Density))
  • G.9701 (G.fast Transceiver)
  • 106a profile
  • On-line Reconfiguration(OLR) for SRA, TIGA, RPA and FRA
  • Loop diagnostic function
  • VDSL2 compatibility

Reviews

There are no reviews yet.

Be the first to review “Vnet 1510K”

Your email address will not be published. Required fields are marked *